Cpu Load Simulation
The Linux Duracell CPU load monitor is a program that drives a Duracell or Energizer on-battery tester to display the CPU load of a system. It can be easily adapted to display other things that can use a slow bar graph kind of display that varies between 0% and 100%. Instructions to hack a...
|License: Freeware||Size: 174.08 KB||Download (92): Linux Duracell CPU load monitor Download|
cFos Broadband Connect is a high-performance Dial-Up driver for Internet Access with high bandwidth. While the driver shipped with Windows can only transfer up to 4.5 Mbyte/s (= 36 Mbit/s), cFos Broadband Connect sends with 50 Mbyte/s (= 400 Mbit/s). Tested with Gigabit LAN, Pentium 4 (3GHz)....
|License: Shareware||Cost: $14.00 USD||Size: 2.1 MB||Download (446): cFos Broadband Connect Download|
heatload is a tool for Linux which plots the CPU load against the CPU temperature as measured by the ACPI subsystem. Installation: As this package is made with the GNU autotools you should run ./configure inside the distribution directory for configuring the source tree. After that you should...
|License: Freeware||Size: 98.3 KB||Download (73): heatload Download|
Karmack is an amusing CPU load monitor applet for the KDE kicker bar which uses the the form of the classic Doom games marine face. The poor guy will bleed when your machine is heavily used. Other effects are triggered on different window manager actions. Whats New in This Release: - Added...
|License: Freeware||Size: 583.68 KB||Download (74): Karmack Download|
|License: Freeware||Size: 238.48 KB||Download (368): CPU_resistor Download|
CPUresistor is a small tool that will give you information about the current CPU load. If you change the fan or heatsink on your processor, this program will help you check whether they fulfill their task.
|License: Freeware||Size: 246 KB||Download (36): CPUresistor Download|
CPU Multi-Gauge for Cisco is an important tool when monitoring the health of your network. A high router cpu load may indicate anything from excessive traffic to unstable routing protocols. Use the Router CPU Load when documenting your network to help create a baseline and identify high load...
|License: Commercial||Cost: $99.99 USD||Size: 39.51 MB||Download (105): CPU Multi-Gauge for Cisco Download|
Shows the current CPU load and vreya which has passed from the moment of loading the operating system. There is a possibility to install on top of all Windows. The program is written in the style of the speedometer in a car. Intuitively understandable interface. For writing of the used...
|License: Freeware||Size: 360.18 KB||Download (101): Cpu Info Download|
Windows Resources Monitor. Indicators: Drives space, RAM size, Swap size, CPU load, GDI/USER resources, Audio volumes, User name, Host name, Clock, Operating System name, System live time, Screen resolution, Battery Meter, Quick Run, Keyboard Language, Ping Monitor, MAPI Exchange Mail, POP3 Mail,...
|License: Freeware||Size: 983 KB||Download (1493): Winpulse Download|
Have you ever faced a situation where you have waited for a program to complete and had the feeling the program may have crashed? Wouldn't it be nice if you could always see if your CPU is really working? Well, you could have the task manager window in front, but how about a program that doesn't...
|License: Freeware||Size: 487.62 MB||Download (227): CpuUsage System Service Download|
CPUOff Lite monitors the average CPU load and initiates computer power off after the average CPU load has been below 15% for more than 60 seconds. The program activates 2 seconds after starting and shuts down 30 seconds after shutdown is initiated unless shutdown is cancelled. It can be initiated...
|License: Freeware||Size: 375 KB||Download (37): CPUOff Lite Download|
CPU LED is a fantastic little menu bar tool for keeping an eye on your CPU load. [...] So if you're at all concerned about your CPU load and you've got space to spare in your menu bar, give CPU LED a whirl. " (Samuel Gibbs - TUAW)
Do you ever wonder how stressed your CPU is? Sometimes, opening a...
|License: Freeware||Size: 1024 KB||Download (32): CPU LED Download|
Complete and efficient remote control solution that gives you full control over remote computer as if you were working directly at it - viewing/controlling remote desktop, running windows and console applications, working with clipboard and files, instant messaging and more. Unattended...
|License: Shareware||Cost: $15.00 USD||Size: 1.5 MB||Download (308): Remote Control PRO Download|
CPUOff monitors average CPU load and initiates computer shutdown if the CPU load has been below a specified percentage for a specified length of time. It can be started manually, on start up or automatically via the Windows Task Scheduler. The CPU load and many other parameters can be configured...
|License: Freeware||Size: 492.76 KB||Download (101): CPUOff Download|
A small utility to check that your disks are configured properly by benching them and getting the average sequential read speed as well as the CPU load. This lets you know that the DMA (Direct Memory Access) is working properly for the disk.
|License: Freeware||Size: 23 KB||Download (132): Quick Bench Download|
SysInfoMyWork is system tool for monitoring state of memory and CPU load. In comfortable way showing count of free and occupied system memory, and CPU load, by using animated icon of taskbar notification area.
|License: Shareware||Cost: $6.00 USD||Size: 166 KB||Download (97): SysInfoMyWork Download|
microramba is a very little Karamba theme to monitor your: - cpu load - used memory - used swap - network in & out traffic Just needed a theme thats not *pretty but taking all of my desktop space*. Archive content: 3 themes: with or without sparcle & for bright desktops. Download...
|License: Freeware||Size: 225.28 KB||Download (70): microramba Download|
A simple cpu load monitor for Mac OS X. Written by Kasper J. Jeppesen, and released as a free application (as in free beer).
|License: Freeware||Download (83): LoadBar Download|
AllOff Lite is an activity monitor and shutdown utility which monitors the mouse, keyboard and CPU load and initiates computer power off or hibernation if there has been no keyboard or mouse activity for 900 seconds and the average CPU load has been below 15% for over 60 seconds. A fixed shutdown...
|License: Freeware||Size: 410 KB||Download (179): AllOff Lite Download|
osstat is a GNOME panel applet for OpenSolaris which shows the CPU load, memory/swap and rootfs usage.
|License: Freeware||Size: 92.76 MB||Download (16): osstat Download|